I’ve set up my first OSPF on a RouterOS 7 - done a few on previous versions. It works so far for me, but I’m missing a place to see the costs of the route candidates. In RouterOS 6 it was via /routing ospf route print - but that’s gone in RouterOS 7 - what’s the new way to check that? The new documentation on help.mikrotik.com talks about route selection and so, but not how to see the candidates with their costs.
thx for your help!
Robert
You can see all routes in /routing route menu with all the OSPF attributes.
Thx for the reply.
Where do I see the costs? The Cost should be 50 and 60. And where do I see the route candidates I get via OSPF? I should see 192.168.76.0/27 2 times.
[Mikrotik] > /routing/route/print
Flags: A - ACTIVE; c, s, o, y - COPY; H - HW-OFFLOADED
Columns: DST-ADDRESS, GATEWAY, AFI, DISTANCE, SCOPE, TARGET-SCOPE, IMMEDIATE-GW
DST-ADDRESS GATEWAY AFI DISTANCE SCOPE TARGET-SCOPE IMMEDIATE-GW
o 0.0.0.0/0 192.168.76.227%vlanTransit********* ip4 110 20 10 192.168.76.227%vlanTransit*********
As 0.0.0.0/0 10.10.188.200 ip4 1 30 10 10.10.188.200%vlanTransit**************
Ac **************/24 vlanTransit************** ip4 0 10 vlanTransit**************
Ac 10.10.188.8/32 vrrpTransit************* ip4 0 10 vrrpTransit*************
Ao 192.168.76.0/27 192.168.76.234%wireTransitRz1********* ip4 110 20 10 wireTransitRz1*********
Ao 192.168.76.192/27 192.168.76.234%wireTransitRz1********* ip4 110 20 10 wireTransitRz1*********
Ac 192.168.76.224/29 vlanTransit********* ip4 0 10 vlanTransit*********
Ac 192.168.76.224/32 vrrpTransit********* ip4 0 10 vrrpTransit*********
Ac 192.168.76.232/30 wireTransitRz1********* ip4 0 10 wireTransitRz1*********
Ao 192.168.76.236/30 192.168.76.227%vlanTransit********* ip4 110 20 10 192.168.76.227%vlanTransit*********
Ac fe80::%ether1rz1-wan-2_7/64 ether1rz1-wan-2_7 ip6 0 10 ether1rz1-wan-2_7
Ac fe80::%vrrpTransit*********/64 vrrpTransit********* ip6 0 10 vrrpTransit*********
Ac fe80::%vrrpTransit*************/64 vrrpTransit************* ip6 0 10 vrrpTransit*************
Ac fe80::%vlanTransit**************/64 vlanTransit************** ip6 0 10 vlanTransit**************
Ac fe80::%vlanTransit*********/64 vlanTransit********* ip6 0 10 vlanTransit*********
Ac fe80::%wireTransitRz1*********/64 wireTransitRz1********* ip6 0 10 wireTransitRz1*********
A H ether1rz1-wan-2_7 link 0
A H vrrpTransit********* link 0
A H vrrpTransit************* link 0
A H vlanTransit************** link 0
A H vlanTransit********* link 0
A H wireTransitRz1********* link 0
Did try it on 7.2.1 and 7.2.2
You can see the cost with the following command. But at the moment you can not see the OSPF candidates. Hope this will come back soon. As this was possible to see under the OSPF menu in Router OS 6.
/rouing/route/print detail where ospf
In RouterOS 7.3 you can use the column “OSPF Metric” in the route list (in RouterOS 7.1 the OSPF Metric was always shown as 0),
Is it possible in the meantime to see accurate route costs for the whole path?
The “OSPF Metrics” only show the cost to the next hop and not the cost for the next router(s)