How to use vlan like cisco ?

RouterOS General
1

Hello, i need some help :slight_smile:
I want to do multiples vlans. But my problems is for assign same vlan for multiple port.
Here is what i want to do :

• Port G0/1 - Mode access (without vlan tagging)
vl_1_Management (ID 1)
• Port G0/2 - Mode access (without vlan tagging)
vl_2_Intra (ID 2)
• Port G0/3 - Mode Trunk (vlan tagging)
vl_2_Intra (ID 2)
vl_3_Server (ID 3)
• Port G0/4 – Mode acces (without vlan tagging)
vl_2_Intra (ID 2)
• Port G0/5 - Mode Trunk (vlan tagging)
vl_2_Intra (ID 2)
vl_3_Server (ID 3)
vl_4_Esx (ID 4)
• Port G0/6 - Mode Trunk (vlan tagging)
vl_2_Intra (ID 2)
vl_3_Server (ID 3)
• Port G0/7 - Mode acces (without vlan tagging)
vl_6_Voip (ID 6)
• Port G0/8 - Mode Trunk (vlan tagging)
vl_6_Voip (ID 6)
• Port G0/9 - Mode Trunk (vlan tagging)
vl_1_Management (ID 1)
vl_2_Intra (ID 2)
vl_3_Server (ID 3)
vl_4_Esx (ID 4)
vl_5_Out (ID 5)
vl_6_Voip (ID 6)

Vlan List :
• vl_1_Management (ID 1)
• vl_2_Intra (ID 2)
• vl_3_Server (ID 3)
• vl_4_Esx (ID 4)
• vl_5_Out (ID 5)
• vl_6_Voip (ID 6)

I have tried to create a bridge for each vlan like this :
Bride List :
• br_vl_1_Management (ID 1)
• br_vl_2_Intra (ID 2)
• br_vl_3_Server (ID 3)
• br_vl_4_Esx (ID 4)
• br_vl_5_Out (ID 5)
• br_vl_6_Voip (ID 6)
but it’s not works.
Anyone have an idea ?
My hardware is a RB493G.

Have a good day.
Sorry for my english (i’m swiss)

2

This should be simple

Go to bridge and create new bridge1
Go to ports and add ports to bridge1
Add vlan interface and add bridge1 to vlan
assign IP to vlan interface

Remember a “bridge” can create a bridge between physical ports and a logical interface :slight_smile: