Hi, I have a Mantbox-15S with this wireless configuration, this will do by a friend that I have no contact with him… with this config only can pass 30Mbps over wireless… How I can modify HT-MCS to permit more traffic over wlan?
Thanks!!
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
add authentication-types=wpa-psk eap-methods=“” management-protection=allowed
mode=dynamic-keys name=security-profile supplicant-identity=“”
wpa-pre-shared-key=Profile1 wpa2-pre-shared-key=Profile2
/interface wireless
set [ find default-name=wlan1 ] ampdu-priorities=0,1,2,3,4,5,6 antenna-gain=15
band=5ghz-onlyn basic-rates-a/g=“” country=spain default-authentication=no
default-forwarding=no disabled=no frequency=5220 frequency-mode=
regulatory-domain ht-basic-mcs=mcs-11,mcs-12,mcs-13 ht-supported-mcs=
mcs-11,mcs-12,mcs-13 mode=ap-bridge nv2-cell-radius=10 nv2-preshared-key=
nv2key nv2-security=enabled radio-name=S7 rate-set=configured
security-profile=security-profile supported-rates-a/g=“” tx-power-mode=
all-rates-fixed wireless-protocol=nv2