Hi, I love my mAPs but I think some enhancements could improve it´s popularity. 1./ make the micro USB port behave like a USB attached NIC - it already works in this way with a powerline adapter, which I especially love about the mAPs, keep this functionality please 2./ make the network port capa…

my thinking about: mAP2nD and mAPLite already support poe in in eht1 up to 57v i think its very hard to get a more capable soc inside a so small enclosure because of thermal and power requirements to do that you will need a soc build around state of art litography so it will be very expensive on…

mAP2nD and mAPLite already support poe in in eht1 up to 57v Yep I missed that, my fault! (I am in fact using my mAP lites since long believing they are incapable of PoE and never trying it… RTFM to myself.) So still most important would be: connecting a mAP via a single cable (USB port acting …

when i see how hot (in temperature) is hAP ac2 i see that in that platform will not be feasible a new map or map-lite, hap ac2 is based on ipq 4018/4019 build on 40 nm lithography but maybe with a qualcomm IPQ6010, IPQ 6028 Networking Pro 400 Platform supporting wifi6 which is build on 14 nm FinF…

maybe with a qualcomm IPQ6010, IPQ 6028 Networking Pro 400 Platform supporting wifi6 which is build on 14 nm FinFET lithography we can expect big power reduction but it will not be cheap https://www.qualcomm.com/products/application/networking/qualcomm-networking-pro-400-platform Well I migh…

Even if this is an old thread, I'm adding my 2 cts here: We use several map Lites on remote locations (isolated technical rooms) to provide connectivity for our techies while they are onsite. However, the next generation of routers we connect them to won't support 10/100Mbps anymore - only 1G and …

See the map ax from here: New Mikrotik Hardware showed in MWC 2026

Looky here: [image] map ax lite? Why not? General At least in the plans, for the moment all we have is preview of a brochure: [image] before or later it will come out.

oooh yes that's sweeeeeet! Okay, I'm not the biggest fan of the case design, but if it has an accessible mode button (on the picture, I'm not sure if what we see on the left of the device is a mode button or the USB-C port), then the mAP-52axD could be a perfect replacement indeed! Thanks for the l…

Yeah, thanks, I'm a bit sceptical. In my eyes the mapLites biggest strength was it's physical appearance. Just as thick as an Ethernet port. This looks way bigger and the design is a bit too fancy. I particularly liked the magnets in the mAPLite as well. The biggest improvement to me would be to b…

[image] woland: the new one can consume up to 19W. Well, yes and no. The device itself uses 8 W (without attachments) of course you do need some hmmmph for the TWO radios, 2.4 and 5 GHz, the 3.5W of the old device with just the single 2.4 radio. 1 radio = 3.5-4 W 2 radios = 7-8 W it make…

HW Idea: mAP Lite - Enhanced (mAP2 & mAP2 lite)

Hardware MikroTik hardware general

jaclaz May 28, 2026, 11:00am 8

Looky here:

before or later it will come out.