I have 3 Mikrotik switches (a CRS310, CRS312, & CRS326) and none of them are accessible via the IP address I’ve given them, nor can they ping out to the OPNSense router that I have (or any other device on my network). I have the CRS312 configured as my aggregation switch which connects to my OPNsen…

Think you missed the gateway...your switch does not know where to go. I prefer to use static leases and have all my network devices supplied with dhcp client.

[image] drmchsr87: /ip address add address=10.0.0.22/24 interface=sfp-sfpplus1 network=10.0.0.0 You are setting the IP address on the sfp-sfpplus1 interface, but this interface is a member port (slave) of the bridge bridge interface. You have to change the entry, so that it's on the bridge in…

Thank you! Removing the "Default VLAN" from the bridge definition has resolved the issue and everything is working that wasn't working before! I don't think I would have ever realized that was invalid to do. I had tried multiple times having the IP address assigned to the bridge because I had see…

[image] drmchsr87: I don't think I would have ever realized that was invalid to do. Well, you missed the Twelve Rules of the Mikrotik Club: [image] The twelve Rules of Mikrotik Club Beginner Basics Preamble and disclaimer: The following is a set of Rules that are i…

I did miss that. Thank you for the link to the rules!

I cannot get my Mikrotik switches to ping the router or connect to download updates

RouterOS

jaclaz August 27, 2025, 5:38pm 5

Well, you missed the Twelve Rules of the Mikrotik Club: