Hi! I am having issues with getting my end devices properly established in their VLANs. the router and CRS are able to ping each other using their VLAN IP but whenever I connect a system to an access port on the CRS I am not able to pull an IP through DHCP, even with a static IP I am not able to p…

Why are you using tag-stacking?

Please read, [image] Using RouterOS to VLAN your network Useful user articles Access Point Overview: In the business environment and increasingly in homes, multiple wifi Access Points are used to provide coverage over wide areas and between building floors. T…

[image] slightrain45: the router and CRS are able to ping each other using their VLAN IP but whenever I connect a system to an access port on the CRS I am not able to pull an IP through DHCP, even with a static IP I am not able to ping the router. TL;DR summary. "the feed a man a fish" appro…

Sorry for the delay, I posted this around the time I had to head to work without realizing. I am very new to the Mikrotik environment and its VLAN configuration methods. I know enough about how VLANs operate to be able to troubleshoot end devices but setting up VLANs from the ground up is not some…

[image] slightrain45: I’ll need to look into why its not prompting me for ROS 7 when I have a chance. There are two places where one "upgrades" a Mikrotik device: System -> RouterBOARD (your screenshot) ... which is similar to BIOS/EFI on a PC and is commonly referred to as routerboot in MT w…

I need assistance with configuring VLANS on RB5009 and a CRS326

RouterOS Beginner Basics

anav December 1, 2025, 9:24pm 3

Please read,

Which contains examples for both router and switch.
And this video perfect for the CR326
https://www.youtube.com/watch?v=YLtGQAQ8iS0&t=1522s