Hello all
I want the best settings for my Access Point Mikrotik 19 dpi angle 120
RB921GS-5HPacD
All customers are about 5 km away from the tower
Hello all
I want the best settings for my Access Point Mikrotik 19 dpi angle 120
RB921GS-5HPacD
All customers are about 5 km away from the tower
There is no such thing as general ideal Wireless settings for any PTP or PTMP Link…
It all depends on the enviroment your Antenna exists… How crowded the air is, how much interference and noise from other Antennas there is, the obstacles between your Antenna and the CPE ( equipment on clients side), the position of the Antenna and how good the coverage would be in accordance to the clients equipment and position…
I think the best thing to do is LIVE UP On the TOWER>
Get your customers to call you when they need service.
Then you can rotate the MT device in the horizontal and vertical to that house location (make sure you get their GPS coordinates and elevation).
What is the equipment on the client side ?
Ok
What about configuration on My RB921 i need configuration Because I’m not very familiar with configuring settings RB921 – If you have a script, please send it to me
LHG / LHGXL /SXTsq / SXT lit5
Ok
What about configuration on My RB921 i need configuration Because I’m not very familiar with configuring settings RB921 – If you have a script, please send it to me
What do you mean you need the configuration ?
Is there a starting point ?
Read here:
https://wiki.mikrotik.com/wiki/Manual:Interface/Wireless
https://wiki.mikrotik.com/wiki/Bridging_Networks_with_SXT
https://wiki.mikrotik.com/wiki/Manual:Wireless_Station_Modes
https://wiki.mikrotik.com/wiki/Manual:Wireless_AP_Client