friends and the following one I was giving one looked at here in my supplier and vi that almost it does not appear I pass through la in conections in the IP firewall of I pass through p2p what this acontencedo and the following a majority of the programs p2p this burlando this type of control, then verifies that these programs uses high door for passes through it of its packages, then had a ideia more than I am not finding as to apply in mikrotik, another thing that can be made tbm for who has more than one link this ideia is with load balecend tbm, pq this passes through of doors high can be transferred pra link deteminando improving passes through of the service most crucial of a supplier that and door(port) 80.
Tcp 1864-65535 in this would be the following one to catch all passes through of the high doors of tcp 1026-1862 in case that it signs I I removed the o I pass through of msn, quaso vc has uses another doors and so to remove it of this list. UDP 1026-65535 how to make this? we go in joining them, to control these plagues that p2p. I go to pass what I made so that I do not know pq this functioning I do not find duty to be some well simple detail.
ip firewall mangle
add chain=prerouting dst-address=11.0.0.0-255.255.255.255 \ protocol=udp dst-port=1024-65535 action=mark-routing
new-routing-mark=UDP-1024-65535
passthrough=yes comment=“Rota of Doors UDP” disabled=no
ip firewall mangle
add chain=prerouting dst-address=11.0.0.0-255.255.255.255 \ protocol=tcp dst-port=1864-65535 action=mark-routing
new-routing-mark=TCP-1864-65535
passthrough=yes comment=“Rota of Doors TCP 1864-65535” \ disabled=no
ip firewall mangle
add chain=prerouting dst-address=11.0.0.0-255.255.255.255 \ protocol=tcp dst-port=1025-1862 action=mark-routing
new-routing-mark=TCP-1025-1862
passthrough=yes comment=“Rota of Doors TCP 1025-1862” disabled=no
ip route
add dst-address=0.0.0.0/0 gateway=10.5.1.1
scope=255 target-scope=10 routing-mark=TCP-1025-1862 \ comment=“link-600” disabled=no
ip route
add dst-address=0.0.0.0/0 gateway=10.5.1.1
scope=255 target-scope=10 routing-mark=TCP-1864-65535 \ comment=“link-600” disabled=no
ip route
add dst-address=0.0.0.0/0 gateway=10.5.1.1
scope=255 target-scope=10 routing-mark=UDP-1024-65535 \ comment=“link-600” disabled=no
What making a mistake can this, or can be bug of mikrotik or same limitations of the same one why what I am using here and to layer 6 and 2.9.27 another thing I use so 3 interface of 4 net and have link and 1 interface of local net, type thus:
CLIENT = ether1 (that pra goes the APS)
LINK1 = ether2 (MODEM)
LINK2 = ether2 (MODEM)
LINK3 = ether3 (MODEM)
LINK4 = ether3 (MODEM)
people if we join in making this ideia to function would decide the problem of many suppliers.
