I want urgent hellp

RouterOS Wireless Networking
1

I have a problem
I have wireless network
and have pppoe connect so the customers can enter through dial up
but right now theres is a problem that customer can have internet with or without dial up
what to do
what setup change it
thanks

2

Don’t assign an IP address to the PPPoE interface!

3

Or make firewall rule in forward chain to drop all traffic from DHCP assigned pool of addresses.

4

Thanks for fast reply
but
please,I want more than that
I want to tell me from where I can change this setup firewall or other
I afraid do other wronge steps and get down whole network

5

Using winbox - goto a Terminal window and press ctrl-x this will put you in safe mode, if you break the router it will roll back the config to before ctrl-x

as ofasa said remove the IP address from the PPPoE interface, then only people who use PPPoE will get a connection.

Once you are OK with your router changes go back to the terminal window and press ctrl-x again to commit your config.

For more help you must post your config for interfaces, IP addresses, firewall rules etc.

6

this is pic to my setup can you check it plz

http://www.al-ghari.com/newspic/1.GIF

7

Hi Hussain, I´trying to configure a MTK routerboard with the same congi.
Colud you pls send me your config?

I failed with great succesfull.

I can´t be the wirelees lan to run.

my e-mail if you want to send me directly, is:

fernando.vazquez@abentus.com

Thanks in advance

Fernando

8

I will help you as much as I can
just tell me what you want
or what problem you faced