wireless A = TX – wireless link – wireless A= RX
Router A < > Router B
wireless B = RX – wireless link – wireless B = TX
-In front of the Router A i add in a switch and 2 pc.
-Behind the Router B i also add in a switch and 2 pc.
but we found that, using the Router to test the wireless link, it shown me the TX and RX transmit rate can up to 60Mbps full duplex (Upload 60Mbps and Download 60Mbps concurrently).
But, when we use the 2 pc to 2 pc, we found it not able to perform as what we saw from the routerboard.
It could be the Ethernet limitation i think, and look for the Wiki, there is no guidance.
Dear Mikrotik support, i just received the routerboard and some related thing last week, possible can i have support over here and this also can become we shared the information over here.
My question is, can i bond 2 network card to get 100Mbps full duplex ethernet connection?
RouterBoard A>>wireless A1 = TX ← wireless link → wireless B1= RX<>wireless A2 = RX ← wireless link → wireless B2= TX<<RouterBoard B
-In front of the RouterBoard A i add in a switch and behind the switch is 2 pc for speed test only.
-Behind the RouterBoard B i also add in a switch and behind the switch is 2 pc for speed test only.
but we found that, using the Router to test the wireless link, it shown me the TX and RX transmit rate can up to 60Mbps full duplex (Upload 60Mbps and Download 60Mbps concurrently).
But, when we use the 2 pc to 2 pc, we found it not able to perform as what we saw from the routerboard.
It could be the Ethernet limitation i think, and look for the Wiki, there is no guidance.
Dear Mikrotik support, i just received the routerboard and some related thing last week, possible can i have support over here and this also can become we shared the information over here.
My question is, can i bond 2 network card to get 100Mbps full duplex ethernet connection?
