In WALL access point with switch

RouterOS General
1

Does anyone know if there is a plan to make a 2.4/5.8 wap with 3-4 wired ports to be used as a direct install on an existing wall box? Ubiquiti has a wall unit but it is only 2.4ghz. with channel planning 2.4 is worthless in a dense environment. the 5.8 narrow band would give ample channels and reasonable speed. In a dorm environment there is only so much bandwidth to the internet so I don’t need 300mb wireless…

Thoughts?

2

It looks like the hAP AC Lite would work if the form factor was rebuilt to attach to a standard wall box. Move the LAN IN port to the back and put the LAN OUT ports on the front. The radios are OK.