Increasing VPLS advertised L2 MTU

RouterOS Forwarding Protocols
1

Hi All,

Just hoping on getting some advise on how to go about increasing the L2 advertised MTU for VPLS tunnels on MikroTik.

Thanks

Ether3al

2

For LDP based VPLS:
/interface vpls set l2mtu=…

for bgp based vpls you cant adjust l2mtu

VLAN over Cisco BGP VPLS (L2MTU Problem?)
3

Hi Mrz

Thanks for the response.

Yes i am aware on how to make the config change but more so the issue around making sure MPLS MTU and L2 MTU are configured correctly to support the increased advertised L2 MTU.

Kind regards.