Infos regarding CCR1036-8G-2S+EM to migrate from Vyos.

[ste]

Hello,

I have a question cuz i truly dont fiind any answears for it.

I whant to buy an CCR1036-8G-2S+EM and use it in ower DC with 2 providers, BGP, at the moment we use Vyos installed on a server with 8GB Ram and an six core Cpu.

We have global table with more then 1.6m routes

Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
10… 4 8708 2797 1452 0 0 0 12:03:51 3054
10.1… 4 8708 3579 1455 0 0 0 12:03:50 3054
89.1… 4 6830 515698 1459 0 0 0 12:03:44 812450
89.1… 4 6830 3991 735 0 0 0 12:03:44 4519
193.2… 4 8708 237827 1452 0 0 0 12:03:50 815226


IPv4 Unicast Summary:
BGP router identifier xxxx, local AS number 33xxx vrf-id 0
BGP table version 1942037
RIB entries 1491080, using 262 MiB of memory
Peers 5, using 102 KiB of memory



At the moment on ower vyos router the cpu usage is 0.1 nothink, and ram is 3GB

My question is dose CCR1036-8G-2S+EM will handle 1.6m routes/tables or how you guys call it ?

I`m not an expert , i do this (bgps,…etc) since January before wa was colocated on an DC.

Thank you.

Problem with ccr is slow single core performance. With BGP one cpu is 100% all the time. You will see slow routing table updates. I see seldom watchdog reboots causing a big network interuption. MT is working on this but it may take a long time until this is stable. Forwarding performance is fine as this is done on more cores.
I consider going VMware with CHR or vyos.

Thank you, i was not expecting this to be onest, the think is i whant to get rid of vyos cuz it has bugs the bgp it get stoped by snmp since version 1.2 and not even till now they didnt fixed

So we should give vmware/CHR a try. Using an adequate CPU single core performance should improve by a big number.

http://forum.mikrotik.com/t/full-bgp-tables-with-two-upstream-isps-using-chr-performance-question/106641/1