Initial configuration RB922UAGS-5HPacD

RouterOS Beginner Basics
1

Hi,

I’m brand new to Mikrotik and after reading and playing with the config, I’m afraid I need to ask for some help.

What I have:
RB922UAGS-5HPacD, RouterOS 6.35
Sierra MC7304 in USB/mini-PCIe slot
Unmanaged switch in eth1

What I’m trying to do via Winbox:
Set the Routerboard to look for internet access via the mini-PCIe port via PPP client
Have basic DHCP server/NAT/firewall services running
Bridge the WAP and eth1 port to use the same DHCP pool

Why I’m having problems:
I saw Quickset and thought this is the easy beginners guide out, but when I select WISP AP, it gives me two options for where the internet is coming from - eth1 or spf1 - both of which are N/A for my application.

I read the guide in the wiki (http://wiki.mikrotik.com/wiki/Manual:Initial_Configuration) and had a few hurdles I couldn’t overcome around the USB internet connection and not using an eth port for WAN.

I have attached a screenshot of where I’m at. Any help is appreciated.

2

OK, so i had the DHCP looking at just the eth interface and not the bridge, so now i have DHCP working on both LAN and WLAN. Still interested in the config of the MC7304, but I have found this article which may help.

http://blog.gowifi.co.nz/2015/04/configure-sierra-wireless-mc7304-for.html

I really would like to know how to use the cli to look at what the current setting are before making any changes. I am really a cli novice and like all non-IT professionals, like a gui more than a cli.