Interface connection with speed limit

RouterOS Beginner Basics
1

Hi All!

A would like to connect 2 or more ethernet interface with speed limit.
For example:

  • ether1 → ether2 : 10Mbps
  • ether1 → ether3 : 20Mbps
  • ether2 → ether1 : 30Mbps
  • ether2 → ether3 : 40Mbps
  • ether3 → ether1 : 50Mbps
  • ether3 → ether2 : 50Mbps
    How can I do it?

I’ve tried:

  • all ethernet ports in 1 Switch plus Simple Queue
    and
  • all ethernet ports in 1 Bridge plus Simple Queue

Simple Queue:

  • Target: ether1 / ether2 / ether3
  • Dst: ether1 / ether2 / ether3

without any success :frowning:

2

All I know about golden law of queuing ( :smiley: ) you should put the fastest queue in higher priority .

3

Fastest, lowest, higher, lower … doesn’t matter.
I’ve tried it with only one Queue … no success :frowning:(

4

When bridging set

/interface bridge settings set use-ip-firewall=yes
5

When bridging set

Code: Select all
/interface bridge settings set use-ip-firewall=yes

MegaThanx! It works fine! :slight_smile:
What if I have more than 1 Bridge? Does it affect all Bridge?

6

Yes that is global setting