Interference Problem

RouterOS Wireless Networking
1

Hello

I have more than 15 mikroTik AP working in 5GHz band around Tripoli city, Libya.
Some with 802.11 protocol and some with nv2.
The biggest problem I face is the interference problem, more than 30 WISP is working in the 5GHz band in the City.

I need some ideas to overcome the interference, I’m thinking to go to 5 MHz channel width, but as all other WISP is using 20 MHz CW there will be no scan results.
As I’m new with Wireless MikroTik world, I need your experience to help me and guide me to the optimum solution
I’m will explain If you need more details.

sorry for my English and thank you.

2

Check with spectral scan for interference and select channel with no or less interference.
http://wiki.mikrotik.com/wiki/Manual:Spectral_scan

3

Here is what I am always facing

If I go to 5.9GHZ or 6GHz the Gain will drop and the signal level of registrations will go down and noise floor go to -100 or even -95 sometimes.
Scan.PNG