I have a FTTH access on the border of a city. My ISP provided me a 8 port switch, wich makes fiber to copper conversion and gives me one static and two dynamic IP addresses.
My setup looks like this:
FTTH==RB750==RocketM5------RocketM5==RB1100AH
| |
|>>>>>>>>>VLAN1<<<<<<<<<|
|>>>>>>>>>VLAN2<<<<<<<<<|
|>>>>>>>>>VLAN3<<<<<<<<<|
Rockets are setted to AP/Station WDS and I have raised MTU to 2024.
On RB750 I have 3 interfaces, each bridged to diffrent vlan, with tags 10,20 and 30
On RB1100AH I have less or more the same setup, but vlans are not bridged, because this is my router that handles public IP addresses.
vlan1 handles my static IP, that provides me access to internet and some server stuff,
vlan2 and vlan3 are ment to be the access to the internet for my clients. Both interfaces vlan2 and vlan3 has DHCP client setted.
All three vlans are working, but problem is when DHCP client is searching for IP address, nothing happens.
So I setted static IP address to vlan1 interface and i’ve got an access to the internet, but sometimes just stops working for an hour or three.
I dont know if there is a connection betwen this two problems.
I think I have already tried all, but apparently I have not. Does someone have a clue, what is happening?