Has anyone had issues with the IP-Scan tool not running. I have tried running the tool in both winbox and CLI. Neither work.
Any ideas? I figure a reboot will fix it but I can’t really reboot the router for something as small as the IP scan not working.
I have used the tool before, often in fact.
Here is the error message I get when trying to run the IP-Scan in CLI:
[****@AwesomeCCR] > tool ip-scan address-range=192.168.***.0/24 interface=ether7
action timed out - try again, if error continues contact MikroTik support and send a supout file (13)
[****@AwesomeCCR] >