Mikrotik Experts,
Please help me. I have been trying to setup a IPIP tunnel between to MT so that remote user can use my IP addresses. Tunnel has been established and I can ping both end of the tunnel from both routers. I need to setup a route so that remote MT will transfer all the traffic via my router and they can use my public IP address at their end.
My current configuration is:
R1= is my router
wan ip = 70.x.x.x/27
IPIP local address = 70.x.x.x
Remote ip = 118.x.x.x
IPIP ip address = 10.0.0.1/24
R2= is Remote router
wan ip = 118.x.x.x/24
IPIP local address = 118.x.x.x
Remote address =70.x.x.x
IPIP ip address = 10.0.0.2/24
I can ping 10.0.0.2 from R1
Also I can ping 10.1 from R2
I would like to use 70.x.x.x/27 subnet’s IPs in the remote router. User connected to R2’s LAN can use 70.x.x.x IPs.
I would also like remote users who are using 70.x.x.x subnet’s IP from R2’s use R1 for all the traffic.
I think some kind of ruing I need to configure. Please help me if anyone has some experience on this type of situation.
Thank You,
Nathtel