Ipsec using Router Board and FortiGate.

RouterOS Forwarding Protocols
1

Hi Guys.


I just would like to know and also if someone have some document on IPSEC vpn between Router Board and FortiGate.


My scenario looks like this i have FortiGate as a VPN server and some Router Boards in Other places that i would like to dial into the FortiGate.

How can i make this possible?


Thanks

2

Hi,

The configuration is simple, http://forum.mikrotik.com/t/ipsec-vpn-mikrotik-rb750-to-cisco-rvs4000-help/54363/1

i tried the IPSEC tunnel with fortigate with some customers and it worked fine.

3

Hi Vikas.


Thanks very much for your help.

So you manage to get the IPSEC vpn between Router Board and FortiGate, and no problem all working?

I thanks you for your Documentation , i would like to know if you have some more?


Thanks

4

Hi Dlabreu

do you need IPSEC template specifically for any Fortigate model.

By the way, you can chk this http://wiki.mikrotik.com/wiki/Manual:IP/IPsec.

5

Hi Vikas


Thanks for your help , yes i am dialing into a FortiGate-111C


Do you have any template for ipsec vpn , then i can put in my house and try dial to the office.


Thanks

6

Hi Dlabreu,

sorry to say that, i donot have any template for Fortigate 111C. The thing which i know is, In ipsec tunnel phase 1 and Phase 2 configuration required.

In Mikrotik you can do the phase-1 configuration in “IP IPSEC peers” and Phase 2 in “IPSEC Policy”.

Phase 2 encryption and authentication is available in proposal.