IPv6 Dual Stack Service

RouterOS Beginner Basics
1

Hi.
Would like to ask ipv6 dual stack service settings?

This is the information provided by your ISP

IPv6 address information
Client Router
WAN Port IPv6 address: 2001: B030: XXXX: FF00 :: 0001/64
WAN Port IPv6 Default Gateway: 2001: B030: XXXX: FF00 :: FFFF/64
LAN Port IPv6 network segment: 2001: B030: XXXX: 0000 :: / 56
DNS server
Main: 2001: b000: XXX :: 1
Secondary: 2001: b000: XXX :: 2

After I set the IPV6 address (WAN Port) with routing (gateway) in Winbox.
Winbox which can get IPV6 Ping position.
But the device is not available ...

PS:
1 have tried DHCP SERVER (only cf IPV4 settings), but there are a New DHCPv6 Bindling not set, estimates should be this place.
2 Customer Handbook (PDF) mentioned: recommended SLAAC + Stateless DHCPv6.

Which one can greatly hope gets advice. Crying

Happy!

2

It seems you misconfigured internal IPv6.
Is your router reachable from the outside? So you can ping 2001:B030:XXXX:FF00::1 from a host out on the internet?

It looks like you configured the whole /56 as your internal network. You have to chose one ore more /64 out of the /56-pool and assign those to your internal interface(s). For the simple startup assign 2001:B030:XXXX:1::1/64 to your internal interface and use 2001:B030:XXXX:1::/64 as your internal pool. Don’t forget to tick “advertise” on your local interface.

If you need more help please post your

/ipv6 export
3

Hi… Can anyone suggest me with a router for IPV4 to IPV6 and reverse transition as per attached diagram.
OR will RB750GL work for this ??

thanks in advance. :slight_smile:
IPv6_IPv4_IPv6.jpg