Ive upgrade to 5.10 which has fixed a problem ive had for ppp ipv6 from my isp
i have assigned my internal pc an ip from the block given by my isp
i can ping any ipv6 OUT from internal computer but i can get zero traffic inbound to that ipv6 address
i cant ping from a remote server to my ipv6 pc, only out, or run a server for that fact
Is this a firewall problem, its a very basic setup i have
[admin@Home] /ipv6> address print
Flags: X - disabled, I - invalid, D - dyna
# ADDRESS
0 DL fe80::20c:42ff:fea2:b928/64
1 DL fe80::20c:42ff:fea2:b929/64
2 DL fe80::27/64
3 G 2001:44b8:217d:8300::/64
4 G 2001:44b8:217d:8302::/56
[admin@Home] /ipv6>
[admin@Home] /ipv6> route pr
Flags: X - disabled, A - active, D - dynamic,
C - connect, S - static, r - rip, o - ospf, b - bgp, U - unreachable
# DST-ADDRESS GATEWAY DISTANCE
0 ADS ::/0 Internode 1
1 ADC 2001:44b8:217d:8300::/56 bridge1 0
2 ADC 2001:44b8:217d:8300::/64 Internode 0
[admin@Home] /ipv6>
Description . . . . . . . . . . . : Realtek RTL8139/810x Family Fast Etherne
NIC
IPv6 Address. . . . . . . . . . . : 2001:44b8:217d:8309::(Preferred)
Link-local IPv6 Address . . . . . : fe80::7c0d:7738:26bf:7872%10(Preferred)
Default Gateway . . . . . . . . . : 2001:44b8:217d:8302::
DHCPv6 IAID . . . . . . . . . . . : 251715660
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-16-2C-F5-0D-00-E0-4C-07-64-5
DNS Servers . . . . . . . . . . . : 2001:44b8:217d:8302::
check firewall. Usually it is either not working at alr or works. try to do traceroute6, to see where it stops.