About a month ago I bridged my Arris NVG589 so that I could have the public IP on my WAN interface. I knew I couldn’t do a true bridge but did what I could. I used the guide listed here to do so.
http://www.dslreports.com/faq/17734
IPv4 works fine but I can’t seem to get IPv6 to work properly. I’ve added my WAN interface to the /ipv6 DHCP client section and set to use Peer DNS and Add default route but I’m kind of lost of what needs to be done after that. I’ve tried several guides but with no success. Some would have me add information to the /ipv6 ND section or the /ipv6 addresses section but with no success. Any help would be appreciated.