Alright, so I’ve worked through every bit of docs I could find but can’t seem to get stateless autoconfiguration working through my Mikrotik router. I’ve got a Hurricane Electric IPv6 tunnel running over Verizon FIOS. I’ve followed docs at the following URLs and still getting no stateless autoconfig:
http://wiki.mikrotik.com/wiki/Manual:IPv6/ND#Stateless_autoconfiguration_example
http://wiki.mikrotik.com/wiki/Setting_up_an_IPv6_tunnel_via_a_tunnel_broker
I’m sure I’m just missing something dumb at this point. Need another pair of eyes. I can ping/traceroute to the LAN IPv6 addresses on the IPv6 tunnel so I know that much is working. Please let me know which bits of configuration will be helpful to troubleshoot 