Is Mikrotik Hex S (2025) E60iUGS compatible with HUAWEI MA5671A ?
When i plug MA5671A router doesn't start - only power led working, no port activity. If i unplug SFP - router working ok.
Device: E60iUGS
RouterOS versions: 7.19.4
SFP: HUAWEI MA5671A
Then I would think it is not compatible.
No ?
Hi,
I can confirm that my Hex S is able to see this SFP module without any issues.
routerboard: yes
board-name: hEX S
model: E60iUGS
firmware-type: en7562
factory-firmware: 7.18.2
current-firmware: 7.20.2
upgrade-firmware: 7.20.2
and SFP module is detected correctly:
/interface/ethernet/monitor sfp1
name: sfp1
status: link-ok
auto-negotiation: done
rate: 1Gbps
full-duplex: yes
tx-flow-control: no
rx-flow-control: no
supported: 10M-baseT-half
10M-baseT-full
100M-baseT-half
100M-baseT-full
1G-baseT-half
1G-baseT-full
1G-baseX
2.5G-baseT
2.5G-baseX
sfp-supported: 1G-baseX
advertising: 1G-baseX
link-partner-advertising:
sfp-module-present: yes
sfp-rx-loss: yes
sfp-tx-fault: no
sfp-type: SFP/SFP+/SFP28/SFP56
sfp-encoding: nrz
sfp-link-length-sm: 20km
sfp-vendor-name: HUAWEI
sfp-vendor-part-number: MA5671A
name: sfp1
status: link-ok
auto-negotiation: done
rate: 1Gbps
full-duplex: yes
tx-flow-control: no
rx-flow-control: no
supported: 10M-baseT-half
10M-baseT-full
100M-baseT-half
100M-baseT-full
1G-baseT-half
1G-baseT-full
1G-baseX
2.5G-baseT
2.5G-baseX
sfp-supported: 1G-baseX
advertising: 1G-baseX
link-partner-advertising:
sfp-module-present: yes
sfp-rx-loss: yes
sfp-tx-fault: no
sfp-type: SFP/SFP+/SFP28/SFP56
sfp-connector-type: SC
sfp-encoding: nrz
sfp-link-length-sm: 20km
sfp-vendor-name: HUAWEI
sfp-vendor-part-number: MA5671A
sfp-vendor-revision: 0000
sfp-manufacturing-date: 18-02-09
sfp-wavelength: 1310nm
sfp-temperature: 59C
sfp-supply-voltage: 3.352V
sfp-tx-bias-current: 4mA
sfp-tx-power: -40dBm
sfp-rx-power: -40dBm