Someone on another forum suggested the issue could be related to mixing tagged and untagged traffic on the same interfaces. They said if such mixed traffic arrives at OPN then it could be the problem, freeBSD is not a happy camper with that traffic.
Curious on thoughts on this?
I feel like this doesn’t matter much since the switch works fine on the physical interfaces, but I tried to follow the configuration set in this post: http://forum.mikrotik.com/t/using-routeros-to-vlan-your-network/126489/1 but run into separate issues:
when I attempt to make ether1 into ‘admit-only-vlan-tagged’, I lose connection to the network completely, even on physical connection on the same VLAN ID