L2 ACL on NetPower 16P via ROS

RouterOS General
1

Hello,

I’ve recently purhased NetPower 16P for powering sereval APs, and configured it to use switch-chip with VLANs, ROS version is 6.45.9.

I’ve configured sereval VLANs and other things, but I’ve problem to set up one thing, L2 ACL filtering.

Device has sereval VLAN configured, but i want to filter packets in one VLAN to allow only PPPoE related packets (0x8863 & 0x8864). It’s my first adventure with CRS-based switch so I don’t know where try to configure it, switch chip menu has no ACL posiotion and setting it up in bridge doesn’t take any effect on traffic.

2

In the switch chip menu, this is called “Rule”.

3

@kowal, take a look at this thread as there are some ACL examples:
http://forum.mikrotik.com/t/acl-firewall-problem-missing-l2-ethertype/140860/1