L2TP-Client failure: bad address or dns name

RouterOS General
1

Hi,
I’m trying to set up a l2tp client but I’m getting the error “failure: bad address or dns name”. Is there some special syntax required?

[user@router] > /interface l2tp-client add name=test connect-to=2a00:1828:2000:594::1000:1000 user=test
failure: bad address or dns name

Kind Regards
Hayo

2

VPN tunnels in RouterOS do not support IPv6 at the moment

3

That’s unfortunate. Any idea if this will be supported in some (near) future version?

4

Hello out there,
I got stuck at this point. I really wanted to create a L2TP or some other tunnel, to archive static IP adresses for routing.
I have two WAN connections, one is ipv4 only, the other one is v4/6 dualstack, I installed an CHR in hetzner cloud. By default I´ve got one ipv4 address and one /64 subnet.
My plan was to make a route (IPv4 to hetzner, using IPv4-only-WAN), that would work, but even if I try using an DNS name, I can not use IP6 to start the Tunnel.3
Is there a v7 beta out there? By using InternetSearch™ I´ve found people 2013 missing this feature.