LAN Internal Traffic Not Showing

RouterOS Beginner Basics
1

Hi there

I have setup quite a lot of mikrotiks before and have never encountered this issue but here it is:

I want to limit using a simple queue the traffic from one PC to the Server located inside the same network, so lets say the PC is 192.168.1.20 and the server is 192.168.1.2 then I create a simple queue with the target at the PCs IP and the destination as the servers IP.

Now I have used this before and it worked, but for some reason its not working now, also I cannot even see local traffic when I torch the bridge. (EG: traffic from the PC to the server)

Do any of you have thoughts on how I can fix this?

2

No thoughts on this guys? I still have not been able to get it to see internal traffic between two IPs

3

Are the two devices plugged into different ports of the router, or are they plugged into a downstream switch? If they are on a switch, the local traffic is never going through the router.

4

Nvm I just figured it out… lol

You need to turn this on in order to see internal traffic between two lan ports.

5

The options you enabled actually disable HW offload … you could selectively do the same by unticking HW on particular bridge port of interest.