LHG LTE Kit | LTE Scan shows nothing

RouterOS Wireless Networking
1

Hi.
LTE scan running on LHG LTE Kit shows nothing. Is scanner broken in current ROS?

[admin@MikroTik] > /system package update print
            channel: stable
  installed-version: 6.46.6

[admin@MikroTik] > /system routerboard print
       routerboard: yes
        board-name: LHG R
             model: RBLHGR
     serial-number: AAFF0AB6428D
     firmware-type: qca9531L
  factory-firmware: 6.43.10
  current-firmware: 6.46.6
  upgrade-firmware: 6.46.6

[admin@MikroTik] > /interface lte firmware-upgrade lte1
  installed: MikroTik_CP_2.160.000_v015
     latest: MikroTik_CP_2.160.000_v015
2

Updated to newest stable version. No changes.

[admin@MikroTik] > /system routerboard print
       routerboard: yes
        board-name: LHG R
             model: RBLHGR
     serial-number: AAFF0AB6428D
     firmware-type: qca9531L
  factory-firmware: 6.43.10
  current-firmware: 6.47
  upgrade-firmware: 6.47
[admin@MikroTik] > /system package update print
            channel: stable
  installed-version: 6.47
     latest-version: 6.47
             status: System is already up to date
3

scan feature works but I not have your r11e-lte module and cannot give you proper answer.
Try do supout.rif and sent it to support@mikrotik.com

4

Thank you, SiB. Tech support request created.
I am using a Tele2 SIM card at the moment. We found that in another LHG LTE with another Tele2 SIM card LTE Scan also does not find anything, but with a SIM card of another operator, LTE scanning works.
Later I will test with the SIM card of another operator. However, it’s not yet clear to me why there might be such a dependency.

5

It may just be the operator. LHG with a Telstra SIM in Australia will only show Telstra and that takes a while for it to pop up.

6

I am using Tomato SIM card in Croatia on SXT LTE6 kit, scanner also shows nothing with current mikrotik release version, but in earlier versions it worked for me