Normally on the LHG60s the SNMP OIDs are
mode=.1.3.6.1.4.1.14988.1.1.1.8.1.2.1 ssid=“.1.3.6.1.4.1.14988.1.1.1.8.1.3.1” frequency=.1.3.6.1.4.1.14988.1.1.1.8.1.6.1
However on this particular unit it is
[admin@LHG60] > /interface w60g print oid
Flags: X - disabled, R - running
0 R mode=.1.3.6.1.4.1.14988.1.1.1.8.1.2.2 ssid=“.1.3.6.1.4.1.14988.1.1.1.8.1.3.2” frequency=.1.3.6.1.4.1.14988.1.1.1.8.1.6.2
It appears as if it’s "snmp"ing as if the w60g is the second interface instead of the first..
Any help how to change this back?