Good evening everyone, greetings from Spain, the following happens to me:
Today I decided to upgrade 2 x cap-2nd (both working perfectly until today) to 6.43.1, when CAP1 charged fast, the CAP2 stayed the ethernet link up and the next second link down.
Both are for Poe in, I have not yet been able to test if it turn up well with direct AC electric to cap.
the Poe out of this “cap2” is responsible a rb2011 on port 10, only got problem with this CAP2 the other CAP1 works on rb2011 withour problem from injector and poe , To CAP2 I have also tried a injector poe but it does not work, it is all trying turn on but the ethernet link falls. up/down all time.
the wire are new 1 year ago. ftp cat 6 madehome
any ideas ? before testing tomorrow to morning with electric AC direct and downgrade if necessary?
Thanks for u replys and sorry for this traslater …
Buenas noches a todos ,saludos desde España ,me ocurre lo siguiente:
hoy me decidí actualizar 2 x cap-2nd (funcionando los dos perfectamente hasta hoy ) a 6.43.1,cuando CAP1 cargo rápido, el otro , CAP2 se quedo el link de ethernet up/down todo el rato .
Los dos están por Poe , aun no he podido probar si enciende bien con corriente AC directa al cap.
el Poe out del CAP2 se encarga un rb2011 por el puerto 10 , solo tengo problema con el CAP2 el CAP1 carga bien y enciende con injector y por poe, al CAP2 he probado también con inyector poe pero no funciona , esta todo rato intentando subir pero se cae el link ethernet .
los cables tienen un año de uso. ftp cat6 echos en casa.
alguna idea ? antes de probar mañana temprano por ac y downgradear si fuera necesario ?
Gracias por sus respuestas.