Little bit confused on Load blanancing with Mikrotik.

RouterOS General
1

Hey Guys,

Im a little bit confused as to the load balancing aspect of the MikroTik. Here is my scenerio. Here at this office we are reaching capacity on our DSL line. We have a 1.5Mbp/384k line. I have a second one going to be installed so here is the question:

I want to load balance/bond these lines so that my capacity is 3.0/768. But from what im reading the MikroTik only does load balancing on the outbound connection? I would like to aggregate the link so that it balances both ways downloads and uploads so that I can get as close to a 3.0/768 link as possible without making the jump to full blown T1 lines.

Is this possible? I saw on the WIKI the improved load balancing but that still is for outbound traffic only.

CLIFF NOTES:

2 DSL lines
1 532/333

Need inbound and outbound balanced for Web, FTP, Email (basic office stuff).

Thanks,

Spook

2

Also this will be done only over the LAN connectiosn…no WLAn present

So 2 WAN’s in to 1 LAN connection going into my router.

Thanks,

Spook

3

Configure dynamic DNS for inbound load balance..It will work