Dears i have two wan connections with different ips in dhcp client i want both of them in one line ,
but the problem is that wan1 is 4mb and wan2 6-8mb and wan 2 sometimes go to 10mb , how to i solve this problem because the loadbalancing does not work correctly
Hi silentwishes,
You simply need to adjust the ratios of traffic you’re sending over each.
If (lets say) wan1 is 4mbps and wan2 is 8mbps, then you’d need to setup PCC load balancing with 3 options, 2 of which would pick wan2.
Therefore you have 2 times the amount of new connections being sent via wan2 as you do wan1.
Thank you very much dear
Dear…
Kindly provide the script ..to do the load balancing so that wan2 takes more load as mentioned above