Wi-Fi Tester requirements:
-
Shall be configurable as Access point and STA \client
-
Shall support Standard 802.11 a/b/g/n/ac/ax
-
Shall be independantly configurable to Frequency Bands either Band 2.4 GHz or 5 GHz (need to test separately with 2.4GHz mode and 5GHz mode)
-
Shall support up to WiFi-6 ( Please let us know if you have model supports up to WiFi7 also, what’s the cost difference )
-
Shall be capable to measure Test parameters : Status, RSSI in dbm, Link Speed, Throughput
-
Life cycle at least 10 years preferrable
-
Shall support Windows11
Shall have capability to control and configure through scripts for test automation.
Any AX device (except for AX Lite or L009UiGS-2HaxD-IN, they only have 2.4Ghz).
No wifi7 yet.
does hAP ax3 work for our requirement?
- Access point and STA \client -> CHECK
- 802.11 a/b/g/n/ac/ax-> Not sure about /a. 802.11 b/g/n certainly yes.
- independantly configurable to Frequency Bands either Band 2.4 GHz or 5 GHz -> CHECK
- WiFi-6 ( Please let us know if you have model supports up to WiFi7 also, what’s the cost difference ) -> CHECK (WIFI6)
- Status, RSSI in dbm, Link Speed, Throughput -> CHECK
- Life cycle at least 10 years preferrable -> depends ... but it's not unheard of for Mikrotik devices to go way over 10 years on a PER DEVICE base ...
- support Windows11 -> define "support" ? W11 clients can connect to it.
Oh and BTW this is a USER forum.
If you want official responses, you might be better off directing your request to sales or support or go via a distributor.