Lost Access to RB112

[giganet]

In trying to solve another issue I am working on in another post I have somehow managed to render the RB112 in-accessible VIA, WinBox or NeighborView.

In WinBox I have tried using both IP and MAC with no luck.
In NeighborViewer I have attempted MAC Telnet with failure.

The only way back into the router after ethernet would be a fully pinned null modem serial cable, correct?


Thanks for the help

[sergejs]

Yes, you have to find Null modem cable and access router via COM port to check the configuration and probably perfrom ‘system reset’.

[balimore]

@giganet

In trying to solve another issue I am working on in another post I have somehow managed to render the RB112 in-accessible VIA, WinBox or NeighborView.

In WinBox I have tried using both IP and MAC with no luck.
In NeighborViewer I have attempted MAC Telnet with failure.

The only way back into the router after ethernet would be a fully pinned null modem serial cable, correct?


Thanks for the help

---

Hello Friend,
i think yes, only with serial DBF9-DBF9 null modem for last action by Terminal console [HyperTerminal Windows].
only that way for connect to your router.

good luck…!!!

regards
Hasbullah.com

[giganet]

Thanks for the help.