Hello
i have this configuration
AP= RB532+SR2+Omni 15dbi
cliente1= edimax 23dbm+ panel 14dbi distancia= 700mts sigmal = -86
cliente2= ediamx 23dbm+grilla24 dbi distancia = 6km signal= -88
any idea for this
Saludos
15dBi omni! jesus, whats the vertical beamwidth on that?? 1 degree?
emcentellas,
What is your noise floor look like?
How is that omni polarized? With those radios and antennas you should get much much better signal levels..
/Henrik
hello mneumark
noise floor is
-79 dBm
saludos
that is your issue right there…you need to switch channels until you find one well above the actual Rx of the ap you are connecting too
emcentellas,
jojo is right. I would survey your area again and see if there is another channel you can use that has a better noise floor. Remember the farther away from 0 the better.
Your noise floor right now is at -79 and your clients are -86-88. So your best bet is to see if you can find a channel with -90 to -100