I am struggling with the throughput. I have tried the recommend n setup and all other variants and I am not getting anythin above 24 Mbps – in one set up I had app. 40 Mbps, but I have not been able to re-establish this again.
Please could you give me some advice.
AP (RB411u w/ R51n):
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-onlyn country=“czech republic”
disabled=no frequency=2462 ht-ampdu-priorities=0,1 ht-rxchains=0,1
ht-txchains=0,1 l2mtu=2290 mode=ap-bridge name=WLAN1 radio-name=AP1_BM
ssid=AP1_BM
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa2-psk eap-methods=“” mode=
dynamic-keys supplicant-identity=MikroTik wpa-pre-shared-key=xxxxxxxx
wpa2-pre-shared-key=xxxxxxxx
Station (RB751u-2HnD - station-Brigde):
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-onlyn country=“czech republic”
disabled=no frequency=2462 ht-ampdu-priorities=0,1 l2mtu=2290 mode=
station-bridge name=MB ssid=AP1_BM
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa2-psk eap-methods=“” mode=
dynamic-keys wpa2-pre-shared-key=xxxxxxxxx
