LtAP mini on Rogers network

RouterOS Wireless Networking
1

Hi there,

I have been trying to get this unit to work with Roger’s sim (CANADA) card. This card is from a mobile phone with substancial data plan. I have been using it on old 3G modem for years, recently wanted to bump the speed to the remote location and bought LtAP mini . I have not been able to get the mini to go on the Rogers network. I can see the LTE interface try to connect but then it quits with some network messages. (I can get the exact message). At this point I’m just trying to figure out if there is a known limitation of using this unit with Rogers SIMs.

I have tried in portable hotspot devices and various phones and it all works but fails in LtAP mini . Any help would be apprecitated. Chers

2

LtAP mini with which LTE interface?

  1. R11e-LTE
  2. R11e-LTE6
  3. R11e-LTE-US
  4. R11e-4G

Regards.

3

hi

it is the R11e-LTE-US

4

anyone?

5

Documentation: https://wiki.mikrotik.com/wiki/Manual:Interface/LTE

Compare latest firmware: R11e-LTE-US v16.02.183961

Enable LOGs & Monitor changes in LTE parameters: http://forum.mikrotik.com/t/r11e-lte6-2ca-not-staying-connected/136004/22
In Script, Enable first line and disable second one to enable all parameters to log.

6

I see that your card supports all frequencies, but you need make sure that the towers that you connect are in these bands:

On Android with SignalCheck Pro app you can see the band that you are connected:

As you can see on notification bar, it says “LTE 7 -106”, 7 means the band that are you connected.

Regards.