and after this the internet starts to fail and it doesn’t even give me nor 1mb of download speed …
I miss that part and I think your problem is only that Name of ISP not exist every time.
/interface lte at-chat lte1 input=“AT*Cell=2,3,37900,118”
Although in the console I have specified which cell to use, in the “Cellular” tab a different one appears
This is strange and looks as some bug.
In my Poland networks I can connect only to that cell what I define in Cell Lock.
You discover in Cell Monitor that cells what are detected via direction & signals and… that bands what are active at lte module but they can be only 2 at ones. Means, CellMonitor is suitable when you use one band. I do in my scripts action like “set band=1,2; cell-comonitor lte1;” and after that change bands to next one like “set band=3,7; cell-comonitor lte1;” and at every 2bands I scan air.
this is an antenna software problem??
When we not use CellLock then CurrentCellID can be move to other antenna at the same or other tower. To log this moving try use: http://forum.mikrotik.com/t/r11e-lte6-2ca-not-staying-connected/136004/22
When we use CellLock then only this specific antenna at specific tower can be connected. Means you will get offline or connection.