Hi,
I have an USB LTE modem attached to my hAP ac³. It has been working fine for over a year but a few months ago a red message appeared in its config page: "other than PIN1 required"
Any idea what this means? Where does it come from? RouterOS or the LTE stick?
Same in the console:
[a@b] /interface/lte> print detail
Flags: X - DISABLED; R - RUNNING; I - INACTIVE
0 R ;;; other than PIN1 required
default-name="lte1" name="My-LTE" mtu=1500 advertised-mtu=1500 apn-profiles=my_apn allow-roaming=no sms-read=no sms-protocol=auto network-mode=lte
I cannot remember if the appearance of this message coincided with a RouterOS update.
The SIM in the LTE stick has an active PIN1, which is correctly set for the interface.
Fixed Dialing Numbers are active and I have not been given the PIN2 by the carrier.
The modem is an Alcatel IK41.