LTE Qualcomm MDM9200

RouterOS General
1

Hello
I’m trying to get working a LTE Modem based on Qualcomm MDM9200.
It is a minipcie format modem, that I use with a USB box.

Actually, when I connect it to my CRS109 and after a reboot, I see it connected to the usb port, but the lte interface is not created, and I cannot go further.

I added the lte package to ROS, but still does not work.

I added supout.rif, if someone can help !

I’m using v6.39.2.

Thanks a lot
supout.zip (402 KB)

2

i have issue with gobi 4000 modem. my modem is BLAZZ RX300, chipset is qualcomm mdm9200 (gobi 4000).
my questions are:

  1. is ros 6.44.3 support this modem?
  2. and, how to usb_modeswitch (in linux) with mikrotik? this modem has usb storage mode that prevent mikrotik to get to modem mode.

kindly appreciate all feedback.

3

I open this support.rif file in mikrotik.com > Account > support.rif viewer and I see:

model: CRS109-8G-1S-2HnD
current-firmware: 3.33
usb-mode: force-host


1 device="1:2" vendor="Qualcomm, Incorporated" 
   name="Qualcomm CDMA Technologies MSM" serial-number="*****************" 
   vendor-id="0x0408" device-id="0xea24" speed="480 Mbps" ports=0 
   usb-version="2.00"
   
ignore-directip-modem: no

You must connect it and check it in RouterOS v6 and v7.

Good HowTo is this post: http://forum.mikrotik.com/t/quectel-ep06-e-and-wap-r-ac-rbwapgr-5hacd2hnd/131724/1 because many stuff with LTE modems are change in last year.
Good Luck!