Hi,
I don’t have a lot of experience with the mikrotik products, apologies in advance if I say something completely off.
MikroTik LHG LTE kit are the devices I have, one of them set in the EU and I’m trying to set one up in the US. Unfortunately,
the seller had shipped the “international” (international should support the freq. bands in the US imo) and not the US kit to the states
but Band 2 is fortunately in both. I tried to configure the kit but was failing to connect to an LTE operator, the RSRP detected in other
devices is very low (same SIM) and the following error is seen (logs):
00:49:26 lte,async,raw lte1: +CREG: 3, 8763, b951d0a, 7
00:49:26 lte,async,raw lte1: +CEREG: 3,"8763","0b951d0a",7
00:49:28 lte,async,raw lte1: +CREG: 11, 2101, 515400e, 7
00:49:28 lte,async,raw lte1: +CEREG: 11,"2101","0515400e",7
whilst the
/interface lte cell-monitor lte1:
PHY-CELLID BAND PSC EARFCN RSRP RSRQ RSSI SINR RSCP AGE
187 B2 1000 -104dBm -14dB 3s
Could the registration issue be due to the bad reception and what does the CREG: 11 mean?
Thanks