I need help!!
I have set up the usermanager according to all of the docs in the Wiki. I go into the User Manager on a routerboard 532A using 2.9.46 as Administrative Owner and I add a user by Mac Address 00:00:00:00:00:00- Not zeros but the actual address. I go to a Mikrotik 532A Wireless AP and turn off authentication. I have no access-list at this point. I set the security profile tab to Mac Authentication. I add the Radius as Wireless with the IP Address and Shared secret. When I go into the logs of the user manager the best I get is “authorization failure” from that Mac. I am lost at this point and have tried everything. I basically have many Mikrotik AP’s that use Mac Access Lists and I would like to have them all come back to one server. I have also purchased a level 6 for this User Manager for unlimited. Any help appriciated.
Thanks!
You can enable ‘radius, debug’ or/and ‘wireless,debug’ to get more information about the problem.
Check that MAC-address matches, provide us with debug logs from the router, when authentication is not possible.
Any news radtke99?
I’m struggling with the same.