Hi All,
Well the the heading says it all!
I really need some serious guru’s! - All I can offer is Karma and my gratitude! (and heck maybe support in the future)
Basically I’m trying to setup a small WISP in my area.
Now, I’m Planing on getting a Omni Antenna erected above my roof and then from there a 23-29dBi Parabolic dish MIMO as well get my internet from a relay on the mountain side!
Now once everything is erected with the following hardware (Kicking it old school with ASCII layouts!):
1x 10dBi Dual Feed Omni Antenna
1x 433L Routerboard with R52n-M or maybe a R52Hn
|||
|||
|||Inside
|||(Bonding the 3x 100mbps ethers)
|||
1x RouterBoard 750GL (Last 2 ether ports are set to Gigabyte speeds to compensate for the three 100mbps)
||
|/|Server1 - TekRadius and Squid Proxy Server
||
|/|Server2 - Webserver
||
||
Internet Relay**
…So as you can see that’s my planned layout for the future…Only equipment I’ve currently got for this is the servers (being trying to test my theories) so if hardware changes need to be made then its no prob!
Anyways, just need your guys opinions and if theirs any easier alternative to this …and if not, would someone mind helping me with the whole Radius user management and Squid Trans Proxy setup
P.S. I Have my internet connected to both servers are because of the tutorials surrounding squid, but i would like to source the internet from server2 only and then server2 is only connected to server1 and not the routerboard. (so that it sort of has a nice flowing process, hehe made no sense!)
Peace Out Guys!
Really Appreciate any input!
Kind Regards,
Raymond