Hi , help needed!
I have mail server behind static wan ip, mail box is win server on private adress : 192.168.15.10
ports are translated from wan to lan , 25, 110 etc! DNS is hosted inhouse , (in DNS zone wan ip is mail.mydomain.com),on same box as mail server app.
Send/recieve works fine from internet, but when trying to setup client mail app in lan , server mail.mydomain.com is unreachable.
Trying to telnet to mail.mydomain.com port 25 , doesn work, same thing from internet works ok.
How to tell router when request sent from lan to mail.mydomain.com is directed to 192.168.15.10?
nat setup(10.10.10.10 is dummy wan ip)
add action=dst-nat chain=dstnat disabled=no dst-address=10.10.10.10
dst-port=8008 protocol=tcp to-addresses=192.168.15.10 to-ports=8008
add action=dst-nat chain=dstnat disabled=no dst-address=10.10.10.10
dst-port=25 protocol=tcp to-addresses=192.168.15.10 to-ports=25
add action=dst-nat chain=dstnat disabled=no dst-address=10.10.10.10
dst-port=110 protocol=tcp to-addresses=192.168.15.10 to-ports=110
add action=dst-nat chain=dstnat disabled=no dst-address=10.10.10.10
dst-port=443 protocol=tcp to-addresses=192.168.15.10 to-ports=443
add action=dst-nat chain=dstnat disabled=no dst-address=10.10.10.10
dst-port=80 protocol=tcp to-addresses=192.168.15.10 to-ports=80
add action=dst-nat chain=dstnat disabled=no dst-address=10.10.10.10
dst-port=53 protocol=tcp to-addresses=192.168.15.10 to-ports=53
add action=dst-nat chain=dstnat disabled=no dst-address=10.10.10.10
dst-port=53 protocol=udp to-addresses=192.168.15.10 to-ports=53
add action=dst-nat chain=dstnat disabled=no dst-address=10.10.10.10
dst-port=143 protocol=tcp to-addresses=192.168.15.10 to-ports=143
This is my first mailserver behind Mikrotik, thx in advance 