Major Network Issues on New RB912UAG-5HPnD

RouterOS Beginner Basics
1

I am new to RouterOS, I jumped in feet first with great excitement but after multiple attempts, a re-configuring, I am at a loss and becoming disappointed.
My Unit:
RB912UAG-5HPnD with R11e-2HPnD
RouterOS: 6.34 (stable)
Firmware: 3.24

What I am wanting is a single AP Dual Band directly connected to a server through a single Ethernet port. Connecting multiple clients(Windows 7) directly to the server, NO internet all the same LAN. No DNS needed all using IP addresses.

The issue I am having is even in my now very simplified setup I get no connectivity(ping) between test clients and no connectivity to server. Oddly enough I can connect my Android phone and ping it from one of the Windows clients. and all clients

Server 192.168.1.2

RouterBoard Setup (*denotes disabled):

Bridge1 192.168.1.1:
ether1, *wlan1, wlan2
wlan2: AP Bridge, 2GHz B/G/N 20MHz, 802.11, Default settings and security
dhcp1: bridge1, pool1 192.168.1.5-25

I have no firewall or extra networking, NATs or routes and no other protocols turned on other than default.

Any thought or obvious issues?

2

Windows clients may do not respond on icmp request due to firewall.
From what you post it should work… Post your config here. Use export command.

3

Wow, I guess I deal with domains to frequently. All my windows machines where blocking pings. I can’t tell you the time I lost to this issue.