Management IP on two interfaces

RouterOS General
1

Hi. I wonder if anyone would be able to help me out of a problem.

I’m not particularly experienced with Mikrotik, and seem to have ended up with the following:


[admin@MikroTik] > /ip address print
Flags: X - disabled, I - invalid, D - dynamic
 #   ADDRESS            NETWORK         INTERFACE
 0   ;;; defconf
     192.168.88.1/24    192.168.88.0    ether2-master
 1 X ;;; mgmt ip
     192.168.7.245/24   192.168.7.0     bridge
 2 D 192.168.7.245/24   192.168.7.0     ether1

As the same address appears to be on two different interfaces, it’s flapping and it’s difficult to access. I’m pretty sure I need to take it off one interface but I’m not sure how to do this, and don’t want to end up locking myself out by guessing. I’m seeing this address use four MAC addresses (two pairs of consecutive addresses)

Mikrotik hAP Routerboard.

             model: RouterBOARD 962UiGS-5HacT2HnT
     serial-number: 6F14076A088C
     firmware-type: qca9550L
  factory-firmware: 3.34
  current-firmware: 6.45.7
  upgrade-firmware: 6.45.7

Would anyone please advise?

Thanks