dear all
i want to limit p2p and give it a specific amount of bandwidth, and give http higher bandwidth and priority.
i have used this example: http://wiki.mikrotik.com/wiki/TransparentTrafficShaper
but the target is for 10.0.0.12/32 , what i want to do is to give the whole users 512k for http only.
how can i change from the client ip (10.0.0.12/32) as in the example to the whole subnet of mine which is (10.10.10.1/32)
10x
10.10.10.0/24 (at a guess if your subnet has 255 hosts)
no it is not.
any other help plz?
you want each user to get a certain limit? you will either have to add one queue for each user, or use PCQ.
if we didn’t understand your question properly, please clarify
How many hosts has you subnet?
When I use pcq I do not specifiy a target, just mark connections/packects and put pcq on the whole interface (your side)
That gets every host on cold side of router
hi
what i want is to give the whole users 768k for http port 80 and 256k for others.
i have 15 users. every one is given a specific bandwith in simple queue with target address to his ip.
each user has 128k down & 24k up.
10x again