Hi, guys
I set up trunk port and have confused a little, how to right mark vlan id on access port
We have 2 ways:
When should i have user untagged and when pvid setting?
What is different?
I tried to use pvid without set untagged, all have worked fine. It is right?
What will happen if i try set different value in pvid and untagged parameter on the same port?
Отправлено с моего Redmi 4 через Tapatalk
Your best bet is to read some decent resources…
First and foremost the best resource is this one…
http://forum.mikrotik.com/t/using-routeros-to-vlan-your-network/126489/1
I read many manuals and topics and know how to implement a vlan configuration
For me it is important to know why i have to determine vlan id in 2 section of setting?
First we write vlan id in bridge port setting pvid
Second we write the same port in bridge vlan setting UNTAGGED.
Why we have to write 2 times the same? Our we don’t need. and can write only in port section. What is particularity these two sections?
Отправлено с моего Redmi 4 через Tapatalk
Ahh okay so your config works you just need an explanation of the settings. I thought they were in the reference?
Well I am sure others will chime in with more detail.